Detail
The ACZ8 has a built-in memory to store the last tested results for later viewing. It can be connected to any PC via USB cable for printing. You can key in the test date, customer name, car number or battery reference number, battery model and capacity to the report. You can add-on your Company name, address and contact number to the report as well. This Analyser is a new way of measuring the Cold Cranking Amps (CCA) of a Starting Battery and it test a wide variety of 12V batteries: Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell.
New Technology:
This Analyzer uses the battery internal resistance gathered during testing to compute the final results of the battery condition. This process involve by a series of shorting pulse across the battery terminals with resulting drop in the voltage being measured by the microprocessors to compute its final results.
The ACZ8 is designed to perform the following tasks:
1. Battery Test:
a. Test results on battery conditions : Either Good or Replace
b. Battery state of charge: Digital display in Volts
c. Key in actual battery rating (CCA or SAE, DIN, EN, IEC, JIS) before test for better accuracy.
d. Battery cell resistance measurement : Display in m ohm e. Battery Life Expectancy: Display in percentage (%).
2. Grounding Test:
Quick and Easy checking of engine and chassis ground with display of results and recommendations after test.
3. Starter Test:
a. Quick and Easy cranking test to determine the battery cranking power and results will be displayed after test.
b. From the test results given, you can determine whether the battery has aged, bad connections or starter problems.
4. Alternator Test:
a. Check the charging conditions of the alternator during electrical loading @ 2,000 rpm and without electrical load @ 3,000 rpm. with results and recommendations display after test.
Advantages:
1. Intelligent > It detects and removes surface charge if any, before proceeding to perform tests for better results.
2. Accurate > Consistent and accurate test results
3. Fast > It takes less than 3 seconds to obtain not only the values but result summary
4. Direct > Testing is done on the battery whether it is on or off the vehicle. Also able to test discharged or weak batteries.
5. Safe> It does not create spark during clamping or wrong connection to the battery while performing tests.
6. Maintenance Free > No internal batteries required. It powers up when connected to the battery posts during testing. And it never discharges or drain the battery. User Friendly:
The operation is fast and simple. When hooked up to the battery posts, the displayed instructions on the screen will lead you through to perform the correct steps.
In the event that you need assistance, the "HELP" key will display information about each function when selected.
Kenmerk
- Can be connected to any PC to print and store the test result
- Tests the car Electrical System
- Performs 4 separate tests:
- Battery Test
- Grounding Test
- Starter Test
- Alternator Test
Specificatie
Operating Voltage: | 9V ~ 15V DC (max) |
Suitable Battery Type: | All types of 12 Volts Automotive Batteries |
Analysing Capacity (Amps): | CCA 100 ~ 1700 Amps |
| IEC 100 ~ 1700 Amps |
| JIS# 100 ~ 1700 Amps |
| EN 100 ~ 1000 Amps |
| DIN 100 ~ 1000 Amps |
Battery Test: | Yes |
Starter Test: | Yes |
Alternator Test: | Yes |
Grounding Test: | Yes |
Screen display: | LCD |
Printing Test report: | via PC (USB cable) |
Show remaining power in: (CCA, DIN, EN, IEC, JIS): | Yes |
Show state of charge in Volts: | Yes |
Show internal resistance (mΩ): | Yes |
Show life expectancy in %: | Yes |
Built-in memory: | Yes |
Reverse polarity protection: | Yes |
Surface charge warning: | Yes |
Cable length: | 170cm. |
Battery analysing time: | Less than 5 seconds |
Dimension: | 9 x 10 x 24cm |
Weight: | 0.42kg |
Goedkeuring: | CE, RoHS en WEEE |
Content
- ACZ8 Accu Aarde Generator Ontsteking tester
- ADC2 Acculijst CCA-DIN-EN waardes
- ADC3 USB Kabel ACZ8
- GB10 Gebruiksaanwijzing
Prijs
{product}144|quantityfield|pricedis3|pricetax1{/product}
Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.