Detail
The DT65 with slim jaw and body is ideal for cramped work areas and crowded electrical panels. The DT65 applications are: Test start and run capacitors, Measure motor run, current, Measure heat, anticipator current, Determine thermocouple voltage, Test line and control, voltages, Measure heating element resistance, Measure and adjust variable frequency drives.
Kenmerk
- Slim jaw and body design for use in crowded electrical panels
- 4,000 count display
- Capacitance range up to 4,000 microfards to test run and start capicitors
- 0.1 DC millivolt resolution to accurately measure thermocouples and use optional adapters
- 0.01 AC Amp resolution to measure heat anticipator current
- Frequency measurement capability
- AC/DC volts up to 600V and AC Amps up to 400A
- Diode, resistance, and audible continuity ranges
- ALL THESE PLUS!
- Auto / manual ranging
- Data hold
- Auto power off
- CAT III 600V rated
Info
Will the DT65 measure temperature? The DT65 has the capability to be used with the BF33 dual input K- type adapters to measure temperature.
Are any other adapters available for the DT65? Yes, the DT65 can be used with the CA71 to measure carbon monoxide and the DA20 to measure pressure.
Can I use the DT65 to troubleshoot variable speed motors? The DT65 has the capability to measure frequency making set up and troubleshooting variable speed motors easy.
Is it possible to measure heat anticipator current with the DT65? The DT65 has a 40A range with 0.01A resolution, which is ideal for measuring heat anticipator and small motor current.
Can I test the run and start capacitors on motors? The DT65 has the ability to measure capacitors up to 4,000 microfarads in size.
How do I measure AC Amps on a device with a power cord? To measure AC amps a single wire must be isolated. The LS59 line splitter makes this easy without damaging the power cord.
Specificatie
DC Voltage: Max Range: | 600V |
Max Resolution: | 0.1mV |
Basic Accuracy: | 0.3% |
AC Voltage: Max Range: | 600V |
Max Resolution: | 0.1mV |
Basic Accuracy: | 1.5% |
DC Amps: | N/A |
DC Microamps: | N/A |
Jaws measures: | AC amps only |
AC Amps: | Max Range: 400A |
| Max Resolution: 0.1A |
| Basic Accuracy: 3% |
Resistance: | Max Range: 40MΩ |
| Max Resolution: 0.1Ω |
| Basic Accuracy: 0.8% |
Frequency: | Max Range: 40MHz |
| Max Resolution: 1Hz |
| Basic Accuracy: 0.5% |
Capacitance: | Max Range: 4mF |
| Max Resolution: 0.001nF |
| Basic Accuracy: 3% |
Temperature: | N/A |
Non-Contact Voltage (NCV): | N/A |
Continuity Buzzer: | <35Ω |
Diode Test: | 1.5mA Max |
True RMS Response: | No |
Peak Hold: | No |
Relative Mode: | No |
Min/Max Record: | No |
Data Hold: | Yes |
% Total Harmonic Distortion: | No |
Range Selection: | Auto / Manual |
Display Type: | 4000 count LCD with analog bar graph |
Operating Temperature: | 32°F to 113°F |
Relative Humidity: | 80% non-condensing |
Storage Temperature: | -4°F to 140°F |
Auto Off / Sleep Mode: | Yes |
Battery Type: | 9V (MN1604) |
Battery Life: | 80 hrs. typical |
Dimensions (H x L x W): | 1.3” x 10” x 2.5” |
Weight: | 365 gram |
Goedkeuring: | CE, RoHS en WEEE |
Content
- DT65 Digitale multimeter tang
- BF60 Standard test lead set
- ET06 Draagtas
- GB10 Gebruiksaanwijzing
Optie
- BF33 Dual Input temperature adapter
- BF68 Deluxe Test lead kit
- CA71 Koolstof Monoxide Adapter voor DMM
- DA20 Druk adapter -30 tot 500 PSI
- LS59 Lijn splitter
- SA06 Microamp adapter
Prijs
171,82 € (142,00 € exclusief BTW) per stuk
Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.