AIE5 IP DataTelCoax Report 8 Remote 20 ID 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Bestel The add to cart button will appear once you select the values above Detail Kenmerk Specificatie Content Optie Prijs Detail The AIE5 Identify, monitor, and correct LAN issues. Cat 3/5e/6/6a, Coax, and Telephone Cable. The AIE5 combines the functions of a high-end cable tester and length measurement device with the capability to identify, monitor, and correct LAN issues associated with physical layer and link conditions in the network. Kenmerk Displays length measurement for each pair in feet or meters using TDR technology Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps Link light to identify location on a hub/switch/router port Tests Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses Generates selectable tones on selected pins for use with tone tracers Supports up to 8 testing and ID remotes for network and telephone cables Supports up to 20 network and coax ID-only mapping remotes. View saved cable tests Full color graphical wire-mapping Ability to define cable name, save cable tests and print all results (cable testing and network testing) Multilingual (English, French, Spanish) Physical features: - High resolution full color graphical display - Displays wire map in color per TIA-568A/B color codes, in pin or pair order (configurable) - Protective rubber boot - Micro USB connector (to export cable reports), RJ45 connector and coax connector Specificatie Measurement Technology: Time Domain Reflectometry (TDR) Cable Measurements: Cable Testing and ID: 305 m (up to 1000 ft) Split Pair Detection: 1m (3 ft) to 305m (1,000 ft) Length Measurement: 457m (0 to 1,500 ft), ± (5%+1ft) Length Measurement: 457m (0 to 1,500 ft), ± (5%+1ft) Supports 20 RJ-45 and 20 F-connector ID only remotes Power over Ethernet: Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE Tests for classes and loads cable up to 25.5 Watts (at class 4) Identifies Mode A or B (pairs with PoE) Active Ethernet: Indicates advertised speeds of 10/100/1000base-t half or full duplex Can Link to network at 10/100base-t Maximum Voltage: Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester. - RJ Jack: 66 Vdc or 55 Vac - F-connector: 50 Vdc or Vac Save Test Results: Stores up to 250 Cable or network tests with user defined names Tone Generation: Tone Frequencies: 730 Hz and 1440 Hz IPv6 & IPv4 Support: Yes VLAN discovery: Yes Discovery Protocols: (CDP, LLDP, NDP) Port Discovery: Yes Phone Service Detection: Yes Ping: Yes Number of Targets: 10+ DHCP: Yes URL entry: Yes Manual address entry: Yes Validate Link: Yes Languages: English, French, Spanish Battery Life: For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery: Operating - 20 hours typical Standby - Life of battery (20uA max) Operating altitude: 3048m (10,000 ft) Operating temperature: 0 to 50°C (32 to 122°F) Storage temperature: -30 to 60°C (-22 to +140°F) Humidity: 10 to 90% non-condensing Enclosure: High-strength PC/ABS plastic with V0 rating with boot Withstands 4 foot drop on to concrete Size: 4.7 x 9.15 x 17.3 cm (1.85”H x 3.6”W x 6.8”L) Weight with Batteries: 510grams (1 lb 2 oz) Goedkeuring: CE, RoHS and WEEE Content AIE5 IP DataTelCoax Report 8 Remote 20 ID Zoeker AHZ6 Data Remote 1-8 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5 AHY2 Coax ID Remote 1-20 AHY4 Data ID Remote 1-20 RJ12 Cable (2x) 4000 Aderzoeker set basic AHV8 Kabel USB naar USB AHX2 Tas GB10 Gebruiksaanwijzing Optie Prijs {product}712|quantityfield|pricedis3|pricetax1{/product} Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.